Brake Mods and Pedal Servicing

  1. Blue (60 shore) T3PA Pro mod on pedal puller
  2. Yellow (70 shore) T3PA pro mod
  3. Blue (60 Shore) Brake Mod in T3PA Pro Bracket
  4. Blue (60 shore) T3PA pro mod
  5. Set of Conical mods (60, 70 and 85 shore)
  6. Green (50 shore) T3PA Pro mod on pedal puller
  7. 30 Shore T3PA Standard
  8. T3PA Standard Mods Set.

Conical Brake Mods for Thrustmaster
T3PA Pro Pedals.


When Thrustmaster released the Conical Brake Mod for the T3PA and T3PA Pro pedals this represented quite a step forward in the performance of potentiometer brake pedals. However they didn't develop the idea fully so we have decided to produce a range of Mods that will provide a significant performance improvement over the standard Conical Brake Mod. We have achieved this by increasing the physical size of the mod which allows a much more progressive rate of travel/pressure and by making the mods out of Polyurethane Rubber rather than the natural rubber of the originals. This also increases the progressiveness of the pedal and allows us to produce these mods in a range of hardness (shore rating). For specific detail please see the graph in the video.

When taking into account the cost of upgrading to Load Cell or Hydraulic Pedals these mods represent excellent value for money and can significantly increase the lifespan of these pedals before you feel the need to upgrade. Similarly if you have already upgraded and have a set of T3PA pro's kicking around the addition of one of these mods is going to make them into a very useful set of backup pedals for minimal cost.

For further information please view the Video below.

Conical Brake Mods for Thrustmaster
Standard T3PA Pedals

In order to design a range of mods for the Standard T3PA Pedals that gave the same range of options as our mods for the pro pedals and that was possible to fit without the user having to make permanent modifications to their pedals has taken quite a while to get right as the pickup points, throws and pivot points for these pedals are totally different to the pro pedals.

If fitted to a standard pedal one of our pro mods will result in a pedal that is exceptionally heavy due to the lack of space to fit a larger size mod and the fact that the standard pedals have less leverage on the mod.

We have designed an additional bracket and a range of mods in softer grades of rubber (50, 40 and 30 shore) that not only give excellent feel to the brake but allow for extra positioning options. This means than console racers using Forza, Assetto Corsa and GTS should have an easier time calibrating their pedals while PC and PCARS 2 racers on the consoles will still be able to use short calibration techniques to acheive that perfect pedal.

For further information please view the Video below.

The standard T3PA Mod Set is going to be available in very limited quantities until we move into our new larger premises later this year. If you check the shop and can't see the std pedal mod set this means that it is out of stock. Please don't email to ask about availability we are making them as fast as we can and any freshly manufactured sets will be put on sale as soon as they are made.